Peel & Stick Heat Shield Heavy

Peel & Stick Heat Shield Heavy

Peel & Stick Heat Shield Heavy

Durable aluminium top layer with greater heat resistant

Ideal for: •Fuel Tank/System •Tunnel Shields •Floor pans •Exhaust Systems •Body Shields •Transmissions •Steering Components •Fluid Lines •Rubber Mounts •Axle Bushings •Motor Cycle fairings •Hot Rod

Peel & Stick Heat Shield Heavy Peel & Stick Heat Shield Heavy
0.65 sq/m 1 x sheets 600mm x 1060mm


Peel & Stick Heat Shield Heavy Peel & Stick Heat Shield Heavy
1.3 sq/m 2 x sheets 600mm x 1060mm


Peel & Stick Heat Shield Heavy Peel & Stick Heat Shield Heavy
1.95 sq/m 3 x sheets 600mm x 1060mm


Our Peel & Stick Heat Shield is the highest quality heat shield material currently available on the market. Constructed from a needle punched fibreglass with a polyester core it comes complete a super tough aluminium face. This product will not separate or pull apart like other products on the market. The product is so good that leading automotive manufactures use it on production vehicles.
The product has been oven test for 30 hours with no failure at 475ºF (246ºC)

Our Peel & Stick Heat Shield has a unique pressure sensitive adhesive making it easy and versatile to install, particularly in tight spaces. It is widely used as a thermal and acoustical barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non ferrous materials.


  • Light Weight
  • Easily formed into place
  • Very effective in limited space
  • Approved at several major OEM's
  • Acoustical sound deadening benefits without the squeak or rattle issues of stampings
  • Interior or exterior applications
  • Easy installation - just peel off the release liner and adhere to surface.


  • Fuel tank/system
  • Tunnel shields
  • Floor pans
  • Exhaust systems
  • Body shields
  • Transmissions
  • Steering components
  • Fluid lines
  • Rubber mounts
  • Axle bushings

Installing Peel & Stick Heat Shield


Sheet sizes are 610mm x 1066mm


Technical Specifications

Material Type:                               Polyester & Fiberglass core material

Temperature:                                Withstands 246ºC (475ºF) oven test for 30 hours with no failure

Core Thickness:                          3mm (0.125 inch)

Foil Thickness:                             0.25mm (0.010”) 

Weight:                                           915-1400 g/m (3-4.5 oz/ft2)

Moisture Absorption:                  0.3% 

Thermal Conductivity                  24ºC: 0.036 W/m/ºK

(K-value)                                         93ºC: 0.043 W/m/ºK

 Adhesion To E-Coated Steel     22.1 N/cm after 24hr Dwell

 Tensile Strength                          526 N/cm2 

 Tear Resistance                          333 N/cm 

Under body applications

         - Transmission tunnels
         - Firewalls
         - Floor pans
         - Under bonnets
         - Fuel tanks
         - HVAC's

Common Q's

How close can I run this to my headers?

A. If you headers are that close to you firewall there is not much else you can use, In extreme locations like this 'yes' Zero Clearance will work to reflect and reduce the heat transfer.

How does this compare to gold reflective tape

A. Reflective tape is super thin and designed to reflect heat. It is limited in its ability to reduce heat transfer. Our heat shield has a true aluminium face which not only reflects, but also effectively dissipates heat. The composite core thermally insulates, further reducing heat transfer. At 3mm this product is superior and offers better thermal insulation.

Customer Reviews

Write a product review

Heat Shield

By: on 29 October 2017
Fitted this product to the underside of my floor pans and transmission tunnel, and has reduced the temperature in the cab of my pickup by at least 20 degrees. Easy to install and great results. Highly recommended


Peel & Stick Heat Shield

By: on 14 February 2017
Great product, really sticky and forms very well around different shapes in the engine bay


zero clearance

By: on 23 March 2016
Great adhesion and moulding qualities. This will really make a difference to the Landy heat problem.


Zero Clearance

By: on 11 October 2015
I love this stuff! Does everything that's claimed. Easy to shape & cut, adhesive is fabulous!


peel and stick heat shield

By: on 30 January 2015
good product received in good order and well packed, thanks guys!