U-Pol Raptor - Spray kits

Tough + Durable protective coating
U-Pol Tintable Raptor 4 Bottle Kit + Complimentary Spray Gun
U-Pol Tintable Raptor 4 Bottle Kit + Complimentary Spray Gun

$279.00


Colour
Spray Gun
Paint Prep Kit
Masking Kit
Quantity


Calculate Shipping

LIMITED TIME ONLY - COMPLIMENTARY SPRAY GUN WITH BLACK AND TINTABLE 4 BOTTLE KITS (Automatically added to cart)

RAPTOR is one super tough texture coating and is ideal for under carriages, wheels houses, utility tubs, tool boxes, fender flares, bars and entire exteriors if your feeling up to it. 

Raptor is a 2-Part paint system which comes ready to mix with paint and catalyst. Available in Black, white and Tintable versions the coating is thick and will give you a neat texture coating which is forgiving in covering a range or surfaces. The paint can be thinned down by adding 2K reducer which will allow the coating to be applied by a 3mm tip spray gun, doing this will give you a finer texture or smooth.

Raptor is also available in Tintable clear which means you can add 10% base coat to match to your vehicles colour code, colour match your tray to suit you solid or metallic painted vehicle.  

Benefits

  • Protects against rust and corrosion
  • Provides excellent UV protection
  • Resistant against fuels, hydraulic oils, animal urine, salt water and more
  • Easy application: no spray booth required
  • Can be applied with: Schutz Gun, HVLP Gun, roller or brush
  • Can be tinted to any colour of your choice
  • Create both smooth and textured finishes.

How much per bottle? 1 x bottle contains 711ml, + hardener of 236ml = 947ml per bottle 

Coverage
Typical Coverage = 3.05m² per litre

4 x bottle kit contains 3.78L = Typical coverage 11.6 sq/m single coat
NOTE: recommended 2 x coats minimum

Mixing
Raptor can be reduced up to 20% with general purpose thiners, this will allow for a smoother texture and the ability to spray using a HVLP gravity gun.
Tintable Raptor is compatible with solvent based mixing systems, use basecoat or solid colours 1K or 2K paints. If using 2K paint systems ensure you activate 2K paint before adding to raptor. Do not use waterbased systems to tint Raptor.

 

Mask Kit includes:
Masking Film Plastic w/Tape & Dispenser -  2.7m x 18m
UV Resistant High Temp Masking Tape - 1 x roll 24mm x 50m

 

Paint Prep Kit includes:
Wax & Grease Remover Easy to use pressure Pack 
Raptor Acid Etch Primer -  Easy to use pressure Pack

 

 

 

(RL_Parent)

IMPORTANT
Always wear a suitable mask when applying this product and ensure adequate airflow
Use a 1K etch primer on bare steel before applying raptor

RAPTOR BLACK

 

TECHNICAL DATA SHEET & PROCESS GUIDE

HERE

RAPTOR TINTABLE

TECHNICAL DATA SHEET & PROCESS GUIDE

HERE

Customer Reviews

Write a product review

U-Pol Black Raptor Kit Adjustable Gun and Prep Kit

By: on 18 September 2023
I chose to purchase this product form Car Builders because not only did they have the best price, but they also have great videos with tips about using the products. The products were shipped out the next day and arrived earlier than the ETA Very happy with the purchase and will be back for more!

18/9/2023

Raptor

By: on 17 August 2021
Great kit comes with everything to do the job and very easy to DIY.

17/8/2021

Amazing product!

By: on 27 May 2021
I can not recommend this product enough. The product was extremely easy to lay down and the finish was incredible. I honestly think you would be stupid to buy this anywhere else. Particulatly being able to buy the kit with the adjustable gun, and wax and grease remover. On top of this the service I received was top notch. The team helped me out with any questions I had about painting this. And was extremely valuable to me. I am have become a loyal customer from this purchase and the service I received.

27/5/2021

Raptor

By: on 20 April 2021
Great product covers really well and is extremely easy to apply

20/4/2021

Awesome paint!

By: on 18 February 2021
Raptor coat is so easy to prep and apply. Gives a great finish that is super hard-wearing. I got 3 light coats on a Pathfinder using the 4L kit and the finish come up beaut.

18/2/2021

Couldnt be happier

By: on 31 May 2020
I have zero experiance with painting or even pulling the interior of a car apart but with this product i did the entire floor and side walls of my swb patrol and the entire outside only just finished a few hours ago easy to use forgiving cant wait to check it out in the sun

31/5/2020