Peel & Stick Heat Shield

Peel & Stick Heat Shield

Zero Clearance

Premium peel & stick under body heat shield Ideal for: •Fuel Tank/System •Tunnel Shields •Floor pans •Exhaust Systems •Body Shields •Transmissions •Steering Components •Fluid Lines •Rubber Mounts •Axle Bushings •Motor Cycle fairings •Hot Rod

Zero Clearance Zero Clearance
0.65 sq/m 1 x sheets 610mm x 1066mm


Zero Clearance Zero Clearance
1.3 sq/m 2 x sheets 610mm x 1066mm


Zero Clearance Zero Clearance
1.95 sq/m 3 x sheets 610mm x 1066mm


Zero Clearance is a premium quality peel and stick heat shield material. It is an advanced alternative to traditional thermal and acoustical metal shields. Constructed from a needle punched fiberglass with a polyester core it comes complete a tough aluminium face. This product will not separate or pull apart like other products on the market.

Zero Clearance has a unique pressure sensitive adhesive making it easy and versatile to install, particularly in tight spaces. It is widley used as a thermal and acoustical barrier in many industries and works effectively to block heat around Fuel Tanks/Systems, Tunnel Shields, Floor pans, Exhaust Systems, Body Shields, Transmissions, Fluid Lines and to protect non ferrous materials.


  • Light Weight
  • Easily formed into place
  • Very effective in limited space
  • Approved at several major OEM's
  • Acoustical sound deadening benefits without the squeak or rattle issues of stampings
  • Interior or exterior applications
  • Easy installation - just peel off the release liner and adhere to surface.


  • Fuel Tank/System
  • Tunnel Shields
  • Floorpans
  • Exhaust Systems
  • Body Shields
  • Transmissions
  • Steering Components
  • Fluid Lines
  • Rubber Mounts
  • Axle Bushings


Sheet sizes are 610mm x 1066mm


Technical Specifications

Material Type:                              Polyester & Fiberglass core material

Tempreature:                               Withstands 246ºC (475ºF) oven test for 30 hours with no failure

Core Thickness:                            3mm (0.125 inch) -

Foil Thickness:                             0.25mm (0.010”) - 

Weight:                                        915-1400 g/m (3-4.5 oz/ft2)

Moisture Absorption:                    0.3% 

Thermal Conductivity                   24ºC: 0.036 W/m/ºK

(K-value)                                       93ºC: 0.043 W/m/ºK

 Adhesion To E-Coated Steel        22.1 N/cm after 24hr Dwell

 Tensile Strength                          526 N/cm2 

 Tear Resistance                           333 N/cm 

Under body applications

         - Transmission tunnels
         - Firewalls
         - Floor pans
         - Under bonnets
         - Fuel tanks
         - HVAC's

Common Q's

How close can I run this to my headers?

A. If you headers are that close to you firewall there is not much else you can use, In extreme locations like this yes Zero Clearance will work to reflect and reduce the heat transfer.

How does this compare to golf reflective tape

A. Reflective tape is super thing and designed to reflect heat. It is limited in its ability to reduce heat transfer. Our heat shield has a true aluminium face which not only reflects but also effectively dissipates heat. The glass core thermally insulates further reducing heat transfer. At 3mm this product is superior and offers better thermal insulation.

Customer Reviews

Write a product review

peel and stick heat shield

By: on 29 January 2015
good product received in good order and well packed, thanks guys!