Made in Australia, Bully Rubber Liner is one tough coating. It's made from recycled tyres and even better, it's non-toxic and water based making it easy to use and easy to clean up.
Bully Rubber Liner can be rolled, brushed or sprayed on. If applying by spray gun a 3mm nozzle is required, you can also apply by stone guard or Schutz style underbody guns.
Bully comes in 1L tins, simply shake and you're ready to go. Screw on an underbody spray gun to the top of tin, connect air supply and spray. This paint offers great adhesion and will stick to most substrates with little preparation.
Bullyliner is a super durable coating and is ideal for; inner guards, floor pans, boots, speaker boxes, tool boxes, bull bars, rockers, industrial equipment, ute trays, trailers, anything you can imagine.
When painting the following substrates we suggest:
Steel - all bare steel should be coated with a etch primer to ensure it is sealed before apply Bully
Aluminium - wipe down with prep wash and paint directly to surface
ABS - prep surface with adhesion promoter and plastic primer as per standard bumper repair
Painted surface - sand surface with min 120g paper to remove all shine.
NOTE: all substrates should be sanded to ensure the paint keys in, the paint will adhere as good as your surface is prepped.
|1L||4-6sqm in a single coat approx.|
|4L||16-24sqm in a single coat approx.|
Minimum two coats for light to moderate abrasion resistance.
Minimum three coats for commercial use.
|Standard curing time per coat||72 hours from application|
Can be brushed, rolled or sprayed (spraying requires minimum 3mm tip gun)
Bully can NOT be watered down or tinted
Bully can be top coated with 1K and 2K paints
1 year on and still looks like new
So easy to get a good result