VanSeal
VanSeal 4mm thick foil faced closed cell foam

$99.00


Qty


Calculate Shipping

Van-Seal is the final barrier designed to create the sealed inner cocoon.  Similar materials are used in the construction and refrigeration as inner liners sealing off environments. By basically bagging the inside of your van from floor to ceiling before structurally lining walls, floor and ceilings, you will create a sealed wall cavity where no thermal bridging or radiant bleed can enter. The Van-Seal is manufactured from a 4mm foam with a durable reflective coating which will package and crush effectively under wall linings. It is durable and tear resistant to bridge over open panels, it also can be glued using a contact adhesive. Tape out joints and seal of wall spaces further trapping any radiant heat from entering. 

Our van Seal has been manufactured so it is flexible and suitable in thickness to packaging inside a van. Forget using impractical materials like reflextix (chrome bubble wrap, think about it when you puncher the sealed bubbles you simply have plastic) and rigid insulation boards which are Styrofoam with foil on each side, difficult to create a sealed wall space and potential to squeak during driving. These materials are impractical to install in your van and won’t achieve the desired results. Remember you goal at this stage is to create a sealed barrier before lining your walls, Van Seal is the most effective solution to achieve this.

 

Available is 10sq/m rolls

Roll Size: 10m x 1m

Note Van Seal is not self adhesive, to position or attached to walls you can use our Premium Spray adhesive and or Van Liner tape

(VS_10M_Parent)

Thickness: 4mm

Roll Size: 1m x 10m

Customer Reviews


Be The First To Review This Product!

Help other Car Builders users shop smarter by writing reviews for products you have purchased.

Write a product review